Recommended Solution for Difficulty With L-Pin Clip on Fastway Weight Distribution Hitch
Question:
I have a Fastway e2 Weight Distribution hitch, i am looking at replacing the L-Pins, as the pull pin is too hard to get in and out. I wondered if the L-Pins came with a 1/4in hole size, so i can use a Coupler Pin or if the L-pins with the clip pins would work? I am struggling to see the safety of the Clip pins as well. Any help is appreciated. THANKS!
asked by: Brettany
Expert Reply:
While I would not recommend using a different clip, and the L-Pins do not come with a different hole size, I do have a solution. Since you have the Fastway e2 Weight Distribution # FA92-00-0600 you can use the Replacement L-Pins and Clips for Equal-i-zer Weight Distribution Systems - 6K to 14k - Qty 2 # EQ95-01-9430.
Equal-i-zer and Fastway are the same company, and these clips are compatible with your system. These L-Pins have an integrated clip to secure the pin. Instead of having to pull the clip out, you can easily flip it up and down to secure it.
I have attached a review video for your reference.
Products Referenced in This Question
Replacement L-Pins and Clips for Equal-i-zer Weight Distribution Systems - 6K to 14k - Qty 2
- Accessories and Parts
- Weight Distribution Hitch
- Pins and Clips
- Equal-i-zer
- Equal-i-zer
more information >
Product Page this Question was Asked From
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Fastway
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Review of Equal-i-zer Replacement Parts - L Pins - EQ95-01-9430
- Shop: Replacement Sway-Control L-Bracket for Fastway e2 Weight Distribution Systems - 6,000 to 12,000 lbs
- Shop: Replacement L-Pins and Clips for Equal-i-zer Weight Distribution Systems - 6K to 14k - Qty 2
- Search Results: sway bar
- Search Results: anti~sway bars
- Shop: Replacement Hardware Kit for Fastway e2 Weight Distribution Head - Round and Trunnion Bar
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW
- Shop: Replacement Hardware Kit for Fastway Sway Control Brackets
- Search Results: jack cover
- Video: Swagman Truck Bed Bike Racks Review - 2023 Chevrolet Silverado 1500
- Q&A: Where Does Hitch Ball Get Installed In Fastway e2 Weight Distribution Hitch FA92-00-0600?
- Q&A: Weight Distribution Recommendation for Trailer with 400 lb Tongue Weight
- Q&A: Is Fastway Weight Distribution Compatible With Curt Shank 17120
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 10-1/4" Rise, 5-1/2" Drop - 1.2K TW
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 7-3/4" Rise, 5-1/4" Drop - 1.2K TW
- Search Results: fastway e2 shanks
- Q&A: How to Determine Correct Shank For Weight Distribution Hitch
- Q&A: Will Equal-i-zer Weight Distribution Shank Fit Fastway Weight Distribution FA92-00-0600
- Q&A: Troubleshooting Brakes Locking Up with a Curt Echo Brake Controller
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Video: Choosing the Right Brake Controller
- Search Results: equalizer
- Shop: Fifth Wheel Hitch