Info Needed to Pick Out Replacement Hub/Drum for Trailer Axle
Question:
I have a 2000 Catalina light 248 tb and I need to now what drum and brakes I need for it I believe it’s 5 x4 1/2 is the bolt pattern.
asked by: Daryl
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. Since we know you have a bolt pattern of 5 on 4-1/2 inches that takes care of that.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: CargoSmart Spare Tire Carrier - E-Track Mount - 3481743 Review
- Video: CargoSmart Spare Tire Holder Review
- Q&A: Do Hub Races Have to Be Replaced Each Time Bearings Are Changed
- Shop: Trailer Wiring
- Search Results: e track
- Search Results: spare tire mount
- Search Results: 7 pin extender
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: CargoSmart Spare Tire Mount for E Track and X Track Systems
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Curt Universal 5th Wheel/Gooseneck 7-Way Extension - 7' Long
- Shop: Loadstar ST205/75D15 Bias Trailer Tire w/ 15" Silver Mod Wheel - 5 on 5 - Load Range C
- Search Results: equalizers
- Search Results: trailer hubs and drums
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation
- Q&A: Hub/Drum Recommendation for 18 ft EZ Dumper Trailer
- Q&A: What is the Proper Torque Range for Trailer Wheels
- Q&A: Correct Replacement Hub and Spindle for Lippert 126003 Hub
- Q&A: Replacement Spindle, Bearings and Hub for 26-foot Prowler M26C Travel Trailer
- Search Results: electric drum brakes
- Shop: Brake Controller
- Search Results: equalizer
- Q&A: Recommended Replacement Hub/Drum and Brake Assembly for Typical Dexter 3500 lb Axle
- Q&A: Can a Hub/Drum Be Installed on Axle Without Electric Brake Assembly
- Shop: RV Power Cord
- Shop: RV Electrical
- Video: Dexstar Tires and Wheels - Wheel Only - AM20208 Review
- Video: Dexter Electric Trailer Brake Kit Installation 23-26