Base Rails For Thule TracRac SR Sliding Truck Bed Ladder Rack On a 2019 Ram 2500 6-6" Bed

Question

Question:

Are these the correct rails to use for a 2019 Ram 2500 with a 6’-6” bed without ram box? I also have a tonneau cover inside bed mounted Thank You

asked by: Andy A

0

Expert Reply:

You will want the Base Rails # TH21501 for your 2019 Ram 2500 with the 6'6" bed. The Base Rails # TH21608 that you found are for 1999-2013 GM Trucks.

Those rails will allow you to use the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT on your Ram.

expert reply by: Bud M

0

Answer 1

When installing your Thule TracRac SR Sliding Truck Bed Ladder Rack part #TH43002XT-782 onto your 2020 Silverado 1500 the front stake pockets are a little larger. In this case it is generally best to expand them by about 25 percent before putting…

view full answer...

Answer 2

Thule offers the strips you speak of in a replacement hardware kit, part #752-186-3001. They do not offer the strips as a separate item.

view full answer...

Answer 3

The correct TracRac SR ladder rack for a 2023 Ram 1500 5-1/2 ft bed without Rambox is the part #TH57RV which comes with a different rail set than the TH21501 so they would not work for you. The correct rails for you truck would be the part #TH24RV.

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 6

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack…

view full answer...

Answer 9

There isn't an upgrade kit, unfortunately but we do have a unit upgrade that'll work great. The MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote #MA00-04500K is a fantastic upgrade to your current unit, providing you with powered…

view full answer...

Answer 10

Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…

view full answer...

Answer 11

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 12

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Base Rails For Thule TracRac SR Sliding Truck Bed Ladder Rack On a 2019 Ram 2500 6-6" Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching