Replacing Older Winnebago RV Tank Monitor Display with SeeLeveL RV Holding Tank Monitor

Question:

Will the SE74VR replace an older monitor that is in a 1998 Winnebago RV? The monitor that is in it is showing inconsistant and wrong levels. Thanks for you help.

asked by: BRADY B

Helpful Expert Reply:

Yes, the SeeLeveL RV Holding Tank Monitor for fresh, gray, black - water pump and heater switch, # SE74VR is designed specifically to be a replacement for older tank monitoring systems. The SeeLeveL # SE74VR uses sensors that are sold separately for single-digit accuracy. The SeeLeveL sensors are mounted on the outside of the tanks, this means they are easy to install, won’t give false readings due to debris, and are easy to maintain. The SeeLeveL tank monitoring system uses technology that can sense fluid levels from the outside of the tank. The sensors' flexible circuit board sticks in place and measures along its entire height. This makes it accurate in single-digit increments. If you are replacing an older monitoring system with serviceable wiring, you can simply splice into that wire, no need to replace the wiring too.

Use the SeeLeveL Sensor for RV Holding Tank Monitor - 6" Long, # SE77VR for 4-1/2" - 7" tall tanks.

Use the SeeLeveL Sensor for RV Holding Tank Monitor - 12" Long, # SE87VR for 5" - 13" tall tanks and you can stack additional sensors to accommodate tanks up to 25" tall.

Use the SeeLeveL Sensor for RV Holding Tank Monitor - 16" Long, # SE27VR for 7" - 17" tall tanks and you can stack additional sensors to accommodate tanks up to 34" tall.

expert reply by: Michael R