Will BAK Revolver X4s Tonneau Cover Fit a 2022 Ram 3500 Long Bed Dually

Question

Question:

My 2022 Ram 3500 is a dually and a long bed. Will the Revolver X4s fit even if this is a dually?

asked by: Dewayne

0

Expert Reply:

Yes, the BAK Revolver X4s Hard Tonneau Cover # BAK74ZR will fit your 2022 Ram 3500 dually long bed. The bed opening is the same on the dually and the non-dually models so it will fit both models.

expert reply by: Jon G

0

Answer 1

The B&W Companion OEM 5th Wheel Hitch #BWRVK3600 is an excellent option for towing with your 2021 Ram 3500 long bed and puck system. It's easy to use yet very reliable and arguably the most solid 5th wheel hitch we have to offer. For…

view full answer...

Answer 2

There is! I recommend using the BAK Revolver X4s Hard Tonneau Cover #BAK74ZR for your 2019 Ram 3500 long bed. The cover rolls up above your bed so it won't make contact with your toolbox and you'll be able to see over the rolled up…

view full answer...

Answer 3

Yes, the BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl #BAK74ZR will fit your 2021 Ram 3500 with an 8-foot bed.

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 7

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 8

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Will BAK Revolver X4s Tonneau Cover Fit a 2022 Ram 3500 Long Bed Dually

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching