Why Is There Slop In My Trailer Coupler When Mounted To the 2-5/16" Hitch Ball?
Question:
I pulled my trailer empty and the locking latch and my ball have damage. Attacted photos. Are there any adjustments needed. I have the right size ball and it looks like there was to much slop between the ball and coupler.
asked by: Dan S
Helpful Expert Reply:
If you have a lot of excess slop in your coupler then you will likely need to replace the coupler latch. A coupler latch like the one in the Repair Kit for Titan Couplers # T1848700 will wear down over time and will need replaced when it wears down.
If you can identify what coupler you have I can help you find the correct repair kit for your Coupler.
The White Grease Hitch Ball Lube # 58117 will help to prevent the coupler latch from wearing down as quickly and also reduce some of the hitch noise you likely experience while towing.
Products Referenced in This Question
Continue Researching
- Shop: Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers - Aluminum - 20,000 lbs
- Shop: Dexter Zinc-Plated Straight-Tongue Coupler - 21,000 lbs
- Shop: Andersen Rapid Jack
- Video: Titan Straight Tongue Trailer Coupler - Standard Coupler - T4853100 Review
- Search Results: lug nut wrench
- Search Results: titan 2 5 16 ball coupler
- Search Results: 2" ball mount
- Search Results: ez jack
- Search Results: trailer breakaway switch
- Search Results: break away switch
- Search Results: break away switch
- Video: Review of M-3 and Associates Enclosed Trailer Parts - Ramp Door Spring - M354FR
- Shop: Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 120-lb Capacity
- Shop: Trailer Hitch
- Video: Blaylock Tandem-Axle Trailer EZ Jack and Wheel Chock Review
- Shop: Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 5,000 lbs
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Shop: Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 18K
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Parts Needed to Install Brake Controller on 2012 Chrysler Town and Country
- Shop: Fifth Wheel Hitch
- Video: Review of Demco Straight Tongue Trailer Coupler - EZ Latch Standard Coupler - DM16080-52
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Video: Anderson Rapid Jack Review
- Shop: Brake Controller
- Shop: Suspension Enhancement