Does the Yakima Replacement Hex Wrench Work on the FreshTrack 4

Question

Question:

Hi, I can see that this item fits Yakima FreashTrack6 - does it also fit Yakima FrashTrack4? Thank you

asked by: Joel

0

Expert Reply:

Yes, the Replacement 5/32" Hex Wrench for Yakima Rooftop Carriers - Tamper Proof item # 8880818 also works on the Yakima FreshTrack 4.

expert reply by: Jerred H

0

Answer 1

For your Thule snowboard carrier 91725B the correct tamperproof tool is actually the part #853-5270-02.

view full answer...

Answer 2

For a replacement Yakima hex wrench we have the part #8880143 which is the size of 5 mm.

view full answer...

Answer 3

If the key number isn't on the face of the lock, it'll be engraved into the side of the lock core. If the lock is unlocked, you can use the Yakima Control Key #Y8007835 to remove the lock core and get the code number off the side. You'd…

view full answer...

Answer 4

We have two tamperproof wrench options part #853-3496 which is an M5 tamperproof Allen wrench. Or, if what you have is the Torx style head with the center removed then you would need the part #853-5270-02. This is what the part #TH7520970001 comes…

view full answer...

Answer 5

I reached out to Yakima and your Yakima FreshTrack 6 Ski and Snowboard Carrier - Locking - 6 Skis or 4 Boards #Y03093 and the security wrench used is the Replacement 5/32" Hex Wrench for Yakima Rooftop Carriers - Tamper Proof #8880818. The…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Does the Yakima Replacement Hex Wrench Work on the FreshTrack 4

Product Page this Question was Asked From

Continue Researching