Converting 2001 Winnebago Journey Manual Awning Into Powered Awning

Question

Question:

We have a 2001 Winnebago Journey DL with a manual awning. The arms are 69inch inches long. Besides the LC434724 conversion do I need to order any other parts to complete the conversion. Thanks,

asked by: Wes A

0

Expert Reply:

All you will need is the Solera 12V Power RV Awning Conversion Kit - Universal - 69" Arms - White # LC434724. No other parts need to be purchased to complete the conversion to powered awning.

expert reply by: David B

0

Answer 1

The Solera 12V Power RV Awning Conversion Kit #LC434724 is designed to work with most Dometic brand awnings. I reached out to my contact at Lippert regarding your particular Dometic system using the model information you provided and it appears…

view full answer...

Answer 2

The Solera 12V Power RV Awning Conversion Kit part #LC434724 is a universal product which isn't specific to any one particular trailer. In order to confirm compatibility, you need to be sure the brand of your existing awning is a Dometic,…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 4

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

The amount of bow that's put into trailer axles like the #7359765 is based on about how much a trailer is typically going to weigh that has a 3,500 lb capacity. So there's a bit of approximation and obviously it can't be totally perfect…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

To convert your Dometic manual awning to a power unit, you can use the Solera 12V Conversion Kit in Black #LC434723 or White #LC434724 if you have a manual crank system. These Solera kits are compatible with Dometic (A&E) awnings like what you…

view full answer...

Converting 2001 Winnebago Journey Manual Awning Into Powered Awning

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching