Does the Receiver Tube Stick Out from the Bumper on Draw-Tite Front Hitch for 2018 Ram 3500

Question

Question:

When using the 65063 does it extend to the front edge of the bumper or is it recessed?

asked by: Greg R

0

Expert Reply:

The Draw-Tite Front Mount Trailer Hitch Receiver part # 65063 which is a fit for a 2018 Ram 3500 extends out from the front bumper by a few inches to allow for better clearance of hitch mounted accessories. The same thing goes for the EcoHitch Hidden Front Mount Trailer Hitch Receiver part # 306-X7900.

expert reply by: Conner L

0

Answer 1

The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31067 is the best option for a motorcycle carrier on your 2018 Ram 3500. I've attached the installation details for you and also a photo of this installed to assist. It is an…

view full answer...

Answer 2

I have a solution for you but you can not use a hitch extension with the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes item #HLY64FR. I recommend mounting it to the front of your 2017 Ram 3500 using the Curt Front Mount Trailer Hitch…

view full answer...

Answer 3

The Hollywood Racks Destination E Bike Rack item #HLY66ZR doesn't have the strength to be rated for a front mount hitch. The folding point isn't strong enough. Instead you will want the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes…

view full answer...

Answer 4

I have a great solution for you. The Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount #HLY64FR. This rack has an 80 pound per bike limit and will hold bikes with tires up to 5 inches. It is approved for use…

view full answer...

Answer 5

We confirmed with Curt that the front hitch part #C31067 is a confirmed fit for your 2014 Ram 3500. I attached a diagram from the install instructions for this hitch for you to check out that shows how it attaches to the trailer frame.

view full answer...

Answer 6

Nope, the airflow to the intercooler radiator on your 2018 Ram 3500 will not be disrupted when you install the EcoHitch front hitch that fits, which is the following part number: - EcoHitch Hidden Front Mount Trailer Hitch Receiver #306-X7900

view full answer...

Answer 7

Yes, the Curt Front Mount Trailer Hitch Receiver #C31067 is a fit for your 2017 Ram 3500. This hitch fits all models of the 2017 Ram 3500 to include all 2 wheel, and 4 wheel drive options.

view full answer...

Answer 8

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Does the Receiver Tube Stick Out from the Bumper on Draw-Tite Front Hitch for 2018 Ram 3500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching