Comparing Front Mount Trailer Hitch Options for a 2019 Chevy Silverado 1500

Question

Question:

what front hitch for a 2019 new body style? Is there 3 options

asked by: Peter S

1

Helpful Expert Reply:

There are multiple front mount trailer hitch options for a 2019 Chevy Silverado 1500, the Curt part # C31088 and Draw-Tite part # DT44HR. The Draw-Tite was designed to work on 2.7L Turbo or 3.0L Diesel engine models whereas the Curt is incompatible at this time. I recommend the Draw-Tite due to the wider fit range.

expert reply by: Conner L

1

Answer 1

The Draw Tite Front Hitch part #DT44HR is a confirmed fit for the 2020 GMC Sierra that has the diesel engine like what you have.

view full answer...

Answer 2

The Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR is confirmed to fit your 2021 GMC Sierra 1500 with the 3.0L diesel engine. This receiver is rated for a vertical load up to 500lbs and a line pull rating of up to 9,000lbs. This Draw-Tite uses…

view full answer...

Answer 3

The Draw Tite hitch #DT44HR does fit your 2020 GMC Sierra 1500 but we also have the Curt #C31088 available too. The Draw Tite fits more sub models so it would be what I would recommend.

view full answer...

Answer 4

Our fitguides get updated regularly when we get new information from our techs after they do installs. There has been a revision to the fitment of the Curt item #C31088 front end hitch on the 2021 GMC Sierra 1500's. It no longer fits and the…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

Replacement arms are available for the Roadmaster EZ5 Base Plate Kit #RM-521569-5 for your 2015 Honda Fit with the part #RM-ARMS. When the original base plate brackets and arms were manufactured, they were made as one part. To be sure that the new…

view full answer...

Comparing Front Mount Trailer Hitch Options for a 2019 Chevy Silverado 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching