Trailer Wiring Harness for 2022 Ford Bronco Sport

Question

Question:

I have a 2022 Ford Bronco Sport. I already have a trailer hitch, but I need the wiring harness. Which part number is recommended? Thank you

asked by: Tim S

0

Expert Reply:

We do indeed offer a 4-pole trailer wiring harness for your 2022 Ford Bronco Sport. I'd recommend the Tekonsha T-One harness, part # TK46FR. If you click the provided link, you can see an installation video.

expert reply by: Mike L

0

Answer 1

I highly recommend the Curt Trailer Hitch #C13418 for your 2020 Chevy Blazer over the Draw Tite part #76023 for two big reasons. The Curt has better towing capacities and is much easier to install! It also looks really great as it fits through the…

view full answer...

Answer 2

The Curt trailer hitch part #C13418 is your best option for a trailer hitch for towing. This USA assembled hitch is very easy to install, has plenty of towing capacity and installs behind the rear bumper panel of your Blazer (see picture) so it's…

view full answer...

Answer 3

The only difference between the Curt and etrailer trailer hitches that fit your 2023 Chevy Blazer is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you prefer. The hitches that…

view full answer...

Answer 4

Good question, and there is just one difference between the Curt and etrailer trailer hitches that fit your 2022 Ford Bronco Sport, and that's their finish. The Curt hitch has a glossy black finish while the etrailer hitch has a matte black…

view full answer...

Answer 5

I recommend the etrailer Trailer Hitch Receiver #e57KR as being the best receiver for your 2022 Ford Bronco Sport. This receiver is custom fit and has a matte black finish to give it the factory appearance. It features a lifetime warranty and is made…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Trailer Wiring Harness for 2022 Ford Bronco Sport

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching