Jensen JVR9000R Powering Off Immediately After Power On
Question:
replaced a jrv212t with a jrv9000r blank screen radeo powers up and shuts down with in a few secents
asked by: Gasper P
0
Expert Reply:
There are a couple of reasons on why your Jensen Touch Screen RV Stereo # JRV9000R is powering up and then powering off.
The first thing I would check is that the unit is getting proper 12V needed for operation. You can do this by unscrewing the unit and testing the leads from the back of the unit with a circuit tester like # PTW2993.
If the issue still persists, let me know and we can troubleshoot further.
.
expert reply by:
Bryce D
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: How to Troubleshoot Your RV Air Conditioner
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: How to Test Brake Controller without Trailer Connected
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Checking Trailer Lights Without Hooking Up to Vehicle?