Fit Kit For Thule WingBar Roof Rack on 2017 Toyota Camry

Question

Question:

I need fit kit for 2017 Camry with naked roof. Wing bar kit says evo 150, 711500

asked by: Jeff R

0

Expert Reply:

Thanks for that information, and the correct fit kit for a Thule WingBar Evo roof rack on your 2017 Toyota Camry is the following:

- Fit Kit for Thule Evo Clamp Roof Rack Feet - 5149 # TH145149

This will fit your '17 Camry with the Evo Clamp Feet for Thule Crossbars # TH710501 and WingBar Evo Crossbars # TH711400 or # TH711420

expert reply by: Kyle S

0

Answer 1

I have a solution for you. Even though the Custom Base Clips and Pads for Thule Evo Clamp Roof Rack Towers #TH145149 is a direct replacement of the THKIT1438, the base clips/pads are not compatible with the Rapid Traverse Feet #TH480R. The base…

view full answer...

Answer 2

I reached out to my contact at Thule and the 400 Aero roof rack from your previous vehicle will not fit your 2017 Toyota Camry. For a rack that will fit your Camry, I recommend the Thule WingBar #TH711420 along with the Evo Clamp Feet #TH710501, and…

view full answer...

Answer 3

I reached out to my technical fit contact at Thule and she said that the fit for Thule Aero 400 feet stopped in 2011 so there are no compatible fits past that date. For your 2016 Toyota Camry, I recommend the Inno system consisting of crossbars…

view full answer...

Answer 4

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The Trailer Hub and Drum Assembly part #AKHD-545-35-K is the correct replacement for an AL-KO 7230. In regards to the braking assemblies, I suggest getting a new pair, the Electric Trailer Brake Kit part #AKEBRK-35-SA. This option will save you some…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 12

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Fit Kit For Thule WingBar Roof Rack on 2017 Toyota Camry

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching