What Are The Steel Plates In The RAS System Used For.

Question

Question:

where does the flat plate with the hole in the center go ? 2016 gmc 2500 4wd

asked by: Kevin C

0

Expert Reply:

The plate you are referring to in the RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty
# RAS3611-CHD will replace the upper overload on your suspension if you have it.

expert reply by: David B

0

Answer 1

The RoadActive Suspension #RAS3611-HD will definitely fit your 1995 Ford F-350. This includes models with dual rear wheels. However, installing this will require permanent removal of the top overload springs as this will essentially replace them.…

view full answer...

Answer 2

The rear suspension enhancement I recommend for your 2022 Chevy Silverado 3500 is the RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS3611-CHD. This kit will provide 3000 lbs. of load leveling support when you are towing your trailer,…

view full answer...

Answer 3

Yes, you will need to replace the inner grease seal when changing from oil baths to the Bearing Buddies. You will also need to make sure that there isn't any grease on the threaded portion of the hubs when installing the Bearing Buddy as this…

view full answer...

Answer 4

Actually all you really have to do is remove the oil from the hub and then pack the hubs with grease and then get the correct bearing buddy to match the threaded hub bore. You will need to measure the inner diameter of where the old grease cap…

view full answer...

Answer 5

To convert an oil-bath hub to a grease hub all you really have to do is is remove the oil from the hub and replace it with grease like the LMX Red grease #L11390. The cap, seal, and bearings you have now are perfectly compatible with grease.

view full answer...

Answer 6

You'll need to measure the outer diameter of the threaded part of your oil cap and then look in the attached link for Bearing Buddy options to see if anything is available. Please note that the only Bearing Buddy available with a threaded fit is…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 11

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

What Are The Steel Plates In The RAS System Used For.

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching