Recommended Flat Towing Equipment For A 2014 Jeep Wrangler

Question:

Hello, Im looking for a towing package for my 2014 Jeep Wrangler, 2 door. Do you supply COMPLETE towing packages base plate, bar, wiring, cables and braking and if so, where do I find it? Thanks,

asked by: Andrew

Expert Reply:

We do not have a complete all in one package but I can piece together all the necessary components needed to flat tow your 2014 Jeep Wrangler. I have the following recommendations for you below:

Tow Bar: Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522. This tow bar features non-binding latches and a large hookup radius to make connecting and disconnecting your tow bar on any terrain a breeze.

Base Plate: Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521448-5. These direct-connect attachment points make hooking up to tow bar quick and simple. The arms are removable to provide a clean look when not in use. Note: this base plate will only fit a standard factory bumper with no guard or winch. If you have a different bumper then please let me know what it is and I can find a compatible alternative.

Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. This diode kit allows you to use your Jeep Wrangler's tail lights and wiring system while preventing feedback from your RV.

Your battery will need to be disconnected while flat towing your 2014 Jeep Wrangler so to make it as easy as flipping a switch you can install the Roadmaster Automatic Battery Disconnect with Switch for Towed Vehicle w/ Supplemental Braking System # RM-766.

Braking System: Brake Buddy Select 3 Portable Supplemental Braking System - Proportional # HM39524. This braking system offers intense, emergency braking or steady, smooth braking in a single portable system. Easily switch between proportional or full braking from your motorhome with the remote. The included charge line kit will keep your Jeep's battery charged while you tow.

Safety Cables: RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000lbs # RM-643. The coiled design of these cables will help prevent them from dragging on the ground and being damaged.

You may also need a high/low adapter to keep the tow bar level between your motorhome and Jeep. This will require some measuring on your part so I've attached our help guide article to walk you through the steps of determining the correct rise/drop needed.