What Bolt Pattern Wheel and Hub for Timbren Axle Less Kit 3500 Off Road Tires
Question:
Hi, I would like to purchase the Timbren 4 Lift Off Road 3,500 lbs with breaks axles and need to know what bolt pattern to for my 2019 F150 . . Thanks
asked by: John T
Expert Reply:
The bolt pattern of your F-150 is 6 on 135 mm which is close to 6 on 5-1/2 inch which is the standard trailer wheel bolt pattern closest but not a match so it would not be transferable. It's not recommended to mix trailer and vehicle wheels as well since they are rated differently.
With the Timbren kit part # TASR35HDS03 you'd want the hub/drums # AKHD-655-6-EZ-K which has the bolt pattern I mentioned and then for brake assemblies # AKEBRK-7-SA.
I attached a link to a page that has all of the wheels we offer with a 6 on 5-1/2 inch bolt pattern as well.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Drop - 5 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 3500 lbs
- Spindles Only
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Ark Articulating Off-Road Coupler for 2" Receivers - Trailer Side - 2" Ball
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Article: Where to Position the Trailer Axle?
- Q&A: Replacement Trailer Axle with 86" Hub Face Measurement and 70" Spring Seat Measurement
- Q&A: How to Get a Ball Mount with 0 inches of Rise or Drop
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Can I Use Dexter Components on Lippert Axles and Vice Versa?
- Q&A: Replacement Grease Seal for CR 21352
- Q&A: Dimensions For The MORryde Trail Kitchen for Jeep Wrangler or Wrangler Unlimited
- Q&A: Availability of Black Trailer Wheel 15 inch Diameter 6 Bolt Pattern Mod Wheel Holes
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: RV and Camper Types, RV Classes
- Article: How to Raise Your Travel Trailer Height