Recommended Timbren Axle-Less Suspension to Replace Lippert 3500 lb Capacity Axle

Question

Question:

Im looking to replace my LCI35T-TB-85.0-70.5-22.5DT-HPIB-SM-G-545, what is the Timbren replacement?

asked by: Brandon U

0

Expert Reply:

The numbers you provided confirm that you have a Lippert 3500 lb axle.

Lippert couldn't tell me if if was a straight, a drop (which raised the trailer) or a lift (which drops the trailer) axle. Here are the available options.

• For a straight spindle, use # ASR3500S05, or # A35RS545E which includes brake assemblies and hub/drums
or for the same assembly but with idler hubs, use # A35RS545
• For a 2 inch lift spindle, use # TASR35HDS07
• For a 4 inch lift spindle, use # ASR3500S06
• For a 4 inch drop spindle, use # ASR3500S04 or # A35RD545E which includes brakes and hubs or #
A35RD545 which includes idler hubs.

I've linked to an install video that you might find helpful.

expert reply by: Mike L

0

Answer 1

The 3500 lb Timbren Axle-Less suspension kit #ASR3500S05 would be a good choice. The spindles provided with the #ASR3500S05 would indeed be compatible with the bearing set provided with the #AKIHUB-550-35-K idler hub, but since the Timbren Axle-Less…

view full answer...

Answer 2

For a 2 inch lift Timbren setup for your trailer the Timbren kit part #TASR35HDS07 would be best option as it has the amount of lift you are looking for as well as has a reasonable weight capacity at 3,500 lbs for your trailer. Then for a hub…

view full answer...

Answer 3

I do have options for you but we would not have a direct replacement for your 3,500 Lb Lippert Axle. Instead, we have the Timbren Axle-Less Trailer Suspension System part #ASR3500S05 or part #ASR3500S06 which as the title states is an axle-less style…

view full answer...

Answer 4

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 5

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 6

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 7

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 8

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 9

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Recommended Timbren Axle-Less Suspension to Replace Lippert 3500 lb Capacity Axle

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching