Front Hitch that Fits 2019 Ram 2500 Big Horn

Question

Question:

Will the Draw-Tite DT36MR fit a 2019 RAM 2500 Diesel Big Horn? I read the past QandAs and there seems to be conflicting fitment specs. Thanks!

asked by: Craig C

0

Expert Reply:

We have a front hitch that fits your 2019 Ram 2500 diesel with the part # C31089 but the # DT36MR does not fit the diesel models.

expert reply by: Jameson C

0

Answer 1

Yes we have confirmed that the Draw Tite front hitch #DT36MR does fit your 2020 Ram 5500 non-diesel.

view full answer...

Answer 2

Though the front mount hitch #EH37FR is not confirmed to fit your 2021 Ram 5500 The Curt Class V Universal Weld-on Receiver Hitch #15902 can be fabricated to fit the front of your 2021 Ram 5500. The hitch has a black powder coat finish that will…

view full answer...

Answer 3

Draw-Tite has confirmed that their 65084 front mounted hitch receiver which we sell as part #DT36MR is NOT a fit for Diesel models of the 2019-2021 Ram 3500 truck, due to the extra plumbing used on the Diesel model. We do offer a fit for you Diesel…

view full answer...

Answer 4

This will depend on the hitch used and the height of the trailer coupler. You want the trailer to be as level as possible. We have a page on calculating hitch height and coupler height to help you find what ball mount would work best. Most light duty…

view full answer...

Answer 5

To add a front mount hitch to your 2023 Ram 3500 diesel, I recommend the EcoHitch item #EH37FR. This hitch is custom fit and confirmed to fit both the diesel and gas models of the 2023 3500. I have linked an installation video below.

view full answer...

Answer 6

You would most likely have to fold Tonneau cover #BAK72310 all the way up in order to have enough clearance to couple to the gooseneck hitch and/or have enough clearance to safely tow the trailer without damaging the cover. But when folded up all the…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Front Hitch that Fits 2019 Ram 2500 Big Horn

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching