Is There a 1 1/4" Trailer Hitch for My 2018 Subaru Crosstek to Carry a 1 1/4" Bike Rack  

We have a 1-1/4 inch hitch that fits the hybrid models of the 2020 Subaru Crosstrek like with the Draw Tite part #36644 or the totally hidden EcoHitch part #306-X7365 but the Curt you mentioned does not fit your vehicle.

If you're wanting a 2 inch hitch for your Crosstrek so you can use your existing bike rack, we have 2 options that I would recommend for you. If you don't mind The crossbar of the hitch being visible, the Draw-Tite Class III hitch,…

We do sell replacement install hardware for all of the hitches we offer with the part #RHK. On the product page you'd need to select the brand of hitch and enter the part number and we'll ship you out the correct hardware…

The Curt trailer hitch part #C12184 that you referenced weighs 29 lbs.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…