How To Convert A Trailer With Air Brakes To Electric Brakes
Question:
I have a 20 ton trailer with drum air brakes. I would like to convert it to electric disk brakes. is this possible?
asked by: Scott P
Helpful Expert Reply:
Yes, it is possible. To get started you will need a hub and drum that matches the bearing and seal on your trailer spindle and your wheel bolt pattern. Confirm this by checking the bearing part number, and seal part number.
Next, you will need left and right hand brake assemblies. To accurately find what you need, you need to know what kind of axle you currently have and it's weight capacity, you will also need to make sure the brake mounting flange bolt pattern is compatible.
Finally you will need some wiring and a 7 way connector. For the wiring you can use Deka Jacketed 2 Wire, 10 Gauge, Brake Wire # 10-2-1 to make your connections, using the white wire for ground and the black wire for power from the 7 way connector; then wire the 7 way connector # A7WCB at the front of the trailer.
To finish off the process, you will need a brake controller like the The Prodigy P2 Brake Controller # 90885, and a wiring adapter like # 37185 if you do not have a 7 way on your vehicle.
Products Referenced in This Question
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
7-Way Round RV Style Trailer Connector - Trailer Side
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- Plug Only
- 7 Round - Blade
- Optronics
more information >
Product Page this Question was Asked From
Deka Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot
- Wiring
- Wire
- Jacketed Wire
- 2 Wire
- 10 Gauge
- Deka
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Convert Trailers Air Brakes to Electric Brakes
- Search Results: air to electric brake controller
- Search Results: air brake conversion kit
- Search Results: electric over air brakes
- Q&A: How to Convert Trailer Air Brakes to Electric or Hydraulic Brakes
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Q&A: How to Bleed Electric Over Hydraulic Trailer Brakes
- Q&A: Replacement Amber Lens for Trailer Light with SAE A P2 DOT 14
- Article: Guide to Choosing the Best Truck for 5th-Wheel Towing
- Q&A: How to Tell if a Vehicle has a Tow Package or Not
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Article: Brake Controller Installation: Starting from Scratch
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Trailer Tire Sizing