Tonneau Cover Recommendation for 2022 Ram 1500 with 5-1/2 Foot RamBox with Utility Track System

Question

Question:

Hi will this cover fit on my 2022 ram 1500 New Design 5.7 length with ram box and bed utility option. The bed utility has the extra railing inside for the sliding tie down cleats. If it does not fit can you recommend a cover that will fit my truck? Thank you.

asked by: Alex S

0

Expert Reply:

We do have some other options that will fit your application, but the Lomax Hard Tonneau Cover # LOM54FR that you referenced will not fit with the utility rails on your 2022 Ram 1500.

For something that does fit the utility rails on your 5-1/2' RamBox bed I recommend checking out the BAKFlip G2 # BAK226227RB or MX4 # BAK448227RB. The G2 has the glossy aluminum finish while the MX4 has the durability of the aluminum but the matte finish so it's a little more subtle and sleek looking.

These covers will fit directly to the utility rails that you have and come with instructions that show you how to accomplish this, which I've also attached to this page for you to check out.

expert reply by: Jon G

0

Utility Track Instructions for BAKFlip Cover on 2022 Ram 1500
(click to enlarge)

Answer 1

The BAKFlip F1 Hard Tonneau Cover - Folding - Aluminum and Fiberglass Item #BAK72207RB is not compatible with a 2021 Ram with a multi function tailgate. I recommend the Lomax Hard Tonneau Cover - Folding - Aluminum - Matte Black Item #LOM54FR. This…

view full answer...

Answer 2

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 3

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 4

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 5

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 6

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Tonneau Cover Recommendation for 2022 Ram 1500 with 5-1/2 Foot RamBox with Utility Track System

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching