Replacement Mounting Brackets for Westin Nerf Bars on a 2005 Ram 1500 Quad Cab

Question

Question:

I have a 2005 Ram 1500 Quad and I have the bars but no brackets. are the 23-299 brackets the correct brackets for my truck?

asked by: Philip E

0

Expert Reply:

Mounting brackets are specific for trucks and the running boards, so you can't just match brackets to the truck or running boards individually. They would need to be matched to the truck and running boards both. That being said, I can tell you that the Replacement Mounting Brackets and Hardware for Westin 3" Round Nerf Bars # 23-299PK that you are asking about are not the brackets you need. Those particular replacement brackets work with nerf bars that do not fit your 2005 Ram 1500.

We have 2 different sets of Westin mounting brackets that fit your 2005 Ram 1500 w/ Quad cab. They are Replacement Installation Hardware Kit for Westin E-series Round Nerf Bars # 23-231PK that work with bars # 23-2310 and # 23-2315. We also have the Replacement Hardware for Westin Signature Series 3" Round Nerf Bars # 25-231PK that work with bars # 25-2310 and # 25-2315.

These will fit your truck but you will need to verify which bars you have to ensure that they will fit the bars correctly.

expert reply by: Scott S

0

Answer 1

The Nerf Bars that install with the hardware you referenced do attach to the frame, as you can see by the accompanying cut out of the instructions that I added. It is important to note that the Replacement Mounting Brackets and Hardware for Westin…

view full answer...

Answer 2

The two hardware kits fit similar Dodge trucks but the big difference is the style of cab that both trucks fit. The #23-232PK is for regular cab trucks like the following: 2002 - 2002 Dodge Ram Pickup 1500 - Regular Cab 2009 - 2009 Dodge Ram Pickup…

view full answer...

Answer 3

The correct replacement hardware for the Westin Platinum Series Nerf Bars on your 2001 Chevy Silverado is part #25-168PK. They're designed to fit certain GM trucks from the early 2000's. I've attached the install details as well as an…

view full answer...

Answer 4

If you have the E-series bars, you will want the Replacement Hardware for Westin E-series Step Bars #23-168PK. If you have the 25 or 26 series bars, you will want Replacement Hardware for Westin 25 and 26 series Step Bars #25-168PK.

view full answer...

Answer 5

You can refer to the linked page that displays all six Westin brand round nerf bars (tube steps) that fit on the 2003 Dodge Ram 1500 Quad cab pickup. Use the photos to determine which one you have. Once you know which bars you have you can check on…

view full answer...

Answer 6

Part #23-232PK are the brackets for the Westin E-Series Round Nerf Bars #23-2320 and #23-2325 which fit the 2007 Dodge Ram regular cab. Since your Dodge is the Quad Cab the Westin Nerf bars that fit your truck that we have replacement hardware for…

view full answer...

Answer 7

I may have a solution for you, but the #23-231PK are designed for round nerf bars that fit on 2002-2009 Ram trucks and not a 2020 Ram 1500. If you've got Westin brand steps on your 2020 Ram 1500 Classic like the Westin Platinum Series Oval Nerf…

view full answer...

Answer 8

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 9

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Replacement Mounting Brackets for Westin Nerf Bars on a 2005 Ram 1500 Quad Cab

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching