Can I Change The Latching Mechanism On My Trailer Coupler To Change From a 1-7/8 to 2 Hitch Ball?
Question:
Instead of changing the coupler out and changing the ball out can can you replace the guts on the coupler from ancient 1-7/8 to 2inch guts on a tongue, will it work? Will it still slide over and latch on the 2inch ball?
asked by: Jason
Expert Reply:
Unless your trailer coupler specifies that it can fit both the 1-7/8" and 2" size trailer balls, I recommend not trying to change the guts of the coupler to fit a 2" ball.
I recommend changing the coupler to the Demco Channel Tongue Trailer Coupler # DM15945. This coupler has an EZ latch coupler that will drop onto and latch to your 2" ball without having to unlatch the coupler. Both couplers will bolt onto a 3" wide straight tongue coupler. If you have a different size or A-Frame coupler please let me know and I can recommend a coupler that will fit your frame.
Product Page this Question was Asked From
Demco Channel Tongue Trailer Coupler - eZ-Latch - Zinc - 2" Ball - Bolt On - 7,000 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2 Inch Ball Coupler
- Bolt-On
- 7000 lbs GTW
- Auto Latch
- No Lockout
- Demco
more information >
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Wiring Diagrams
- Q&A: How to Replace a 4-Way Trailer Connector with 8 Wires
- Q&A: Can Trailer 4-Way be Ran to Trailer with 8 Wires for Trailer Wiring
- Q&A: Difference Between Trailer Tire Sizes ST205/75R15 and ST225/75R15
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Q&A: Replacement Demco EZ-Latch Coupler For 2" Balls For A Trailer
- Q&A: Angle of Different Stabilizer Positions for Ark Drop Down Corner RV Stabilizer Jacks
- Article: Trailer Couplers
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Article: How to Bleed Your Trailer Surge Brakes