What Is The Pressure Reading Source For The Valterra RV Water Pressure Regulator

Question

Question:

Does the pressure gauge read the source pressure or the pressure the RV is seeing?

asked by: Brad

1

Helpful Expert Reply:

The gauge on the Valterra RV Water Pressure Regulator and Gauge for RVs # A01-1124VP is going to display the pressure of the "city water" coming into your RV. If the gauge is showing higher than 40-50 psi then either the gauge is not properly working or the regulator itself is not dropping the city water pressure down to a safe level. If you see low pressure on the gauge then you'll know the issue is with the city water source and not with your RV.

expert reply by: Kevin C

1

Answer 1

The max water pressure that most Rv/trailers can handle is 55 psi. This isn't a hard and fast rule but it is a general rule of thumb since most of them use the same type of fittings. If you were to use the Valterra High Flow Water Regulator…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 4

To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and the…

view full answer...

Answer 5

The Camco RV and Marine Disposable Water Filter #CAM40043 will last, on average, three months. As you mentioned, that is only a ballpark because of how differently people use it; if you are camping 100 percent of the time it is realistic to expect…

view full answer...

Answer 6

The Lippert Flow Max RV Toilet #LC67AF requires approximately 11-1/4" of space from the wall to the center of the drain.

view full answer...

Answer 7

The Replacement Cam Lock Cylinder #295-000004 is measured at the threads, so you have done it correctly. I went to the warehouse and got the same measurement as your photo, 1-1/8". You would not be able to order these cylinders to match your…

view full answer...

Answer 8

The only style of lock cylinders we carry for doors are for cam locks which would not be a compatible replacement for your Fastec (FIC) lock cylinder. To get both of your doors keyed the same you would need to replace both door latches with new ones…

view full answer...

Answer 9

Thanks for the photos and information - that always makes things easier on our end! We do have a handful of replacement pin boxes that fit in place of your Lippert Rhino Pin Box. Since you don't think you'll want/need the air bag kit I…

view full answer...

Answer 10

Thank you so much for the pictures! That is exactly what I need. Your 2023 Solitude 2930RL has what's called a Lippert Rhino pin box. The Rhino Box, like the Lippert 1621 you mentioned, is a specific bolt pattern and to replace it with a MORryde…

view full answer...

What Is The Pressure Reading Source For The Valterra RV Water Pressure Regulator

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching