Is Replacement Tongue Safety Pin Y57FR Compatible With Yakima HoldUp EVO - 2 Inch Shank

Question

Question:

Is this compatible with Yakima holdup 2 inch bike carrier?

asked by: S A

0

Expert Reply:

Yes, the correct replacement safety pin for the Yakima HoldUp EVO Bike Rack for 2 Bikes and 2" Hitches is indeed the part you asked about:

- Replacement Tongue Safety Pin # Y57FR

expert reply by: Kyle S

0

Answer 1

The pin of the Replacement Tongue Safety Pin for Yakima Dr. Tray and HoldUp EVO Bike Racks #Y57FR has a diameter of 3/8".

view full answer...

Answer 2

The overall length is 2-3/4 inches, and the diameter is 5/8 inches of the Replacement Secondary Pull Pin Assembly #8880530. This is a direct replacement for the Yakima TwoTimer and Yakima FourTimer bike racks.

view full answer...

Answer 3

Here are the measurements for the Replacement Pull Pin for Yakima HoldUp Bike Racks item #Y39FR. Diameter: 5/8" length: 5-3/8"

view full answer...

Answer 4

For a Yakima TwoTimer the correct spring pin replacement is the part #8890314.

view full answer...

Answer 5

If your HoldUp was manufactured between 2008-2009, you'll need #Y39FR. If you have a HoldUp EVO, use part #Y57FR. If your HoldUp was built after 2009 let me know, and we can search further. If you're referring to the latching spring pin, we…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Is Replacement Tongue Safety Pin Y57FR Compatible With Yakima HoldUp EVO - 2 Inch Shank

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching