bing tracking image
Q & A Icon

Recommended Trailer Cover for 16 foot Sure-Trac Trailer  

Question:

I am looking to purchase a cover for a sure trac 7 x 16 vee nose that has 6 inches of extra height. I would like to have it zippered on each side in the back.i alse would like the roof points reenforced with someting as these points are very sharp. I can provide pictures and measurements as required. Thank you

0

Expert Reply:

The best option for your Sure-Trac trailer would be the Adco SFS AquaShed Cover for Bumper Pull Trailer - Up to 16' Long - Gray # 290-46004. This cover is 192" long x 106" wide x 94" tall. From what I have found about your trailer it looks like the typical inside height is 6'6" so with or without an extra 6" of height this should work well.

It has zippers on each side in the back as well as on the passenger side for easy access to your trailer and has cinch ropes at the front and rear to remove slack. The cover also has reinforced elastic corners to reduce wear. If you are really concerned about the sharp corners on your trailer I recommend using some foam or other material to cover the points when the cover is on just to be safe.

I would measure from the nose to the rear of the trailer to just to make sure the trailer does not exceed 16'. If it is longer than 16' we do have the Adco # 290-46005 for trailers that are 16'1" - 18' long. I have attached a video review of the cover for your reference.

expert reply by:
0
Robin H

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>