Furrion Vision S Rear Camera no Signal, Stopped Working Suddenly

Question:

While traveling the camera suddenly stopped working. Monitor is showing no signal. Blue light on camera is on. Removed camera, hooked to power cord for monitor. Camera works fine without pairing it to monitor. It showed the linked chain on the screen for rear camera #4. Re-paired it , Works fine in the truck. Re-installed in rear of 5th wheel. Again, showing [no signal]. Now what? I purchased this from etrailer, and Im using a Ford F-350 and have been since I bought the monitor and it worked fine until last Thursday. I wrote to Furrion today and they said it could take 2-3 days for a response. Im really needing this camera working.

asked by: Roger A

Expert Reply:

So based on what you described with your Furrion Vision S Wireless RV Backup Camera System # FOS05TASF, with it suddenly stopping working while traveling and working while hooked to the monitor, the best guess is that the antenna on the camera is the issue.

Take a look at the camera's antenna and see if it is possibly loose, even a smidge; if so that can effect the transmission between the camera and monitor. If it is not, then see if there is possibly any type of corrosion or other damage to the antenna itself that may be hampering it and if so you can replace it with the Replacement Antenna # 772577.

expert reply by: Kyle S