Upgrading To a 5 Monitor For Furrion Vision Camera Systems
Question:
I have a Furrion 4.3 monitor and it was recently damaged by falling and the monitor now has a black dead spotinch in the middle. I would like to upgrade the damaged monitor to a easier to see 7inch monitor. Can I do this using my current 4.3 power plug and mou ting equipment and have it link up with my currently mounted camera?
asked by: Mark B
Expert Reply:
To use the Replacement 7" Monitor # FR47FR the camera kit that you currently have must be the Furrion Vision S Camera # FCN48TASF. If you have the older Vision or Vision 2 cameras the Vision S screens are not compatible.
If you do have the older system you will need to upgrade as the older parts have been discontinued. The Furrion Vision S Wireless RV Backup Camera System # FOS05TASF will contain the 5" screen with a rear camera.
We also have the Furrion Vision S Wireless RV Observation Camera System # FCE48TASL-05 that will have the same monitor and rear camera but also includes 2 side view cameras. These come in handy for seeing your blind spots and will allow you to see both sides of your camper when maneuvering to watch for hazards on your blind side. And with the new screen being touch sensitive you can easy change views by touching the camera you would like to see or see up to 4 cameras on one screen.
Products Referenced in This Question
Furrion Vision S Wireless RV Backup Camera System w/ 3 Cameras - 5" Screen
- RV Camera System
- Backup Camera
- Observation Camera
- Touch Screen
- Anti-Glare
- Mirrored Image
- Night Vision
- Motion Detecting
- Waterproof
- Wireless Signal
- 120 Degrees
- Dashboard Mounting Bracket
- Suction Cup Mount
- Side Marker Lights
- 5 Inch Display
- 3 Cameras
- Furrion
more information >
Furrion Vision S Wireless RV Backup Camera w/ Night Vision - Rear Mount - Black - Qty 1
- Accessories and Parts
- RV Camera System
- Camera
- Rear Camera
- Black
- Furrion
more information >
Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen
- RV Camera System
- Backup Camera
- Observation Camera
- Built-In Microphone
- Touch Screen
- Anti-Glare
- Mirrored Image
- Night Vision
- Motion Detecting
- Waterproof
- Wireless Signal
- 120 Degrees
- Dashboard Pedestal Mount
- Suction Cup Mount
- Below Rear Clearance
- Side Marker Lights
- 5 Inch Display
- 1 Camera
- Furrion
more information >
Product Page this Question was Asked From
Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System
- Accessories and Parts
- RV Camera System
- Monitors
- Furrion
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Hanger Spacing Dimensions for Installing Double-Eye Leaf Springs on a Trailer
- Q&A: Installation Information for the Replacement Cables for Enclosed Trailer Ramp Spring # ERS160D96
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Article: What To Look For When Buying Ratchet Straps
- Q&A: How To Determine Blue Ox Spring Bar Weight Capacity
- Q&A: Can Furrion Vision S with 5 inch Monitor be Upgraded to 7 inch Monitor
- Q&A: How to Wire Two 6-Volt Batteries In Series to Double Output Voltage
- Q&A: Will Camera for 4.3" Furrion Vision S Wireless RV Camera System Work with 7" Monitor
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Tire Sizing
- Article: 5 Things to Know About Weight Distribution Hitches