Demco 2" A-Frame Couplers Dimensions Requirements
Question:
I would like to use this coupler to replace the existing Demco EZ Latch 2-5/16inch coupler on my Featherlite trailer, in order to be able to use the trailer with the 1-1/4inch receiver and 2inch ball max size available on my vehicle. The dimensions given seem to be the same with one exception - the width of the opening at the rear of the coupler is shown as 10-3/4inch whereas my existing coupler measures about 10-1/4. Can you confirm that this coupler will fit my trailer?
asked by: Douglas M
Expert Reply:
That is correct the inner dimension of the Demco A-Frame Trailer Coupler item # DM14793-95 is 10 3/4 inches. I have attached a picture that breaks down the measurements. You would need to fabricate a spacer on either side to attach this coupler to your trailer. The Bulldog Heavy-Duty Cast Head Coupler w/ Wedge Latch item # BD43805W0317 is a weld on coupler that has a 10 1/4 inch inner measurement. I have attached a picture of it also.
Products Referenced in This Question
Bulldog Heavy-Duty Cast Head Coupler w/ Wedge Latch - 2" Ball - A-Frame - 8,000 lbs
- A-Frame Trailer Coupler
- Standard Coupler
- Weld-On
- 8000 lbs GTW
- 2 Inch Ball Coupler
- Trigger Latch
- Bulldog
more information >
Product Page this Question was Asked From
Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2" Ball - Bolt On - 10K
- A-Frame Trailer Coupler
- Standard Coupler
- Bolt-On
- 10000 lbs GTW
- 2 Inch Ball Coupler
- Auto Latch
- Demco
more information >
Continue Researching
- Shop: Ark Drop Down Corner RV Stabilizer Jacks - 30" Long Corner Steadies - Black - Qty 2
- Shop: Easy Grease Trailer Hub and Drum for 5.2K to 7K Axles - 12" - 8 on 6-1/2 - Galvanized
- Search Results: scissor jack camper jacks
- Shop: Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide - Steel - 300 lbs
- Q&A: Angle of Different Stabilizer Positions for Ark Drop Down Corner RV Stabilizer Jacks
- Video: Review of Ark Camper Jacks - Stabilizer Jack - ARK94FR
- Shop: Swagman Nomad Bike Rack for 2 Bikes - 2" Hitches - Frame Mount
- Shop: Complete Propane Tank Holder Mounting Kit for 20-lb Tanks - Black
- Shop: Timbren Axle-Less Suspension - Spindle Only - Off-Road Tires - 5,200 lbs
- Shop: Demco A-Frame Trailer Coupler w/ Jack Hole - eZ-Latch - Zinc - 2" Ball - Bolt On - 10K
- Video: Review of Optronics Trailer Lights - Tail Lights - OPT57NR
- Q&A: Dimensions for the 10K Demco eZ-Latch A-Frame Trailer Coupler
- Search Results: st235/75r15
- Search Results: lp tank cover
- Shop: RV Covers
- Video: Review of Ark Camper Jacks - 2 Stabilizer Jack - ARK34FR
- Video: Review of Ultimate Jack Trailer Jack - A-Frame Jack - 322-RDJ-2K
- Video: Lippert Components RV and Camper Steps - Motorhome - LC432682 Review
- Q&A: Can ARK Stabilizer Jacks Rotate 180 Degrees
- Video: Demco A-Frame Trailer Coupler - Standard Coupler - DM14793-95 Review
- Q&A: Dimensions of Weld-On Plate for Ark Drop Down Corner RV Stabilizer Jack Kit
- Q&A: Recommended Replacement Stabilizer Jacks For A 2011 K-Z Durango 1500
- Q&A: How Far Out Will The Coupler Sit On The Demco DM14791-97 A-Frame Coupler?
- Video: Review of Demco A-Frame Trailer Coupler - Standard Coupler - DM14791-97
- Search Results: receiver bike rack
- Search Results: propane tank tray
- Search Results: tire fenders
- Search Results: surface mount tail lights
- Q&A: Replacement Pull Out RV Steps For A 2018 Coachmen Apex Nano 193BHS Trailer Trailer
- Article: Trailer Tire Sizing