ABMA Precision Rating of the Replacement Trailer Hub Bearing - L68149

Question

Question:

What is the ABMA Precision rating for your L-68149 cone?

asked by: Dwain H

0

Expert Reply:

The ABMA Precision Rating of the Replacement Trailer Hub Bearing - L68149 part # L68149 is class 2.

expert reply by: Conner L

0

Answer 1

The 1/8" of lateral movement on the hub does not seem right. It sounds like it is possible the bearings in the hub may not be the correct size for your spindle. The best solution is to double check the bearings and measure the spindle with…

view full answer...

Answer 2

Outside diameter of the #SW1000 measures 1-9/16 inches.

view full answer...

Answer 3

There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a…

view full answer...

Answer 4

The Bearing #L68149 and Race #L68111 are the common sized inner components for a 3,500lb axles. The Bearing Buddy Bearing Protectors #BB2441SS will fit a 2.441" hub bore which is the closest size we have to the 2.361" race. If this…

view full answer...

Answer 5

The bearings included with hub #AKHD-655-6-EZ-K are made by TRP International. They make a lot of trailer and RV parts including hubs and brakes as well. They are members of several RVing and trailering organizations including NATDA, NATM, RVIA,…

view full answer...

Answer 6

We do indeed offer an idler hub with a 5 on 5 inch wheel bolt pattern for a 3500 lb axle. The #AKIHUB-550-35-K uses the L68149 inner and L44649 outer bearing, you might want to check the reference numbers on your existing bearings to ensure that this…

view full answer...

Answer 7

We don't know exactly what bearings you would need for your trailer but I can tell you how to determine that information. You will want to take your hub off of your trailer and remove both the bearings, there will be a number stamped on them that…

view full answer...

Answer 8

With an EZ-Lube axle you do not have to take off the hubs to re-pack the bearings. You can use grease like #L11390 along with a grease gun #L30200 to add new grease and push the old grease out. However, it is best to pull the hubs and manually…

view full answer...

Answer 9

That is an excellent question! In some instances mixing regular grease like part #L11390 won't hurt when mixed with marine grease, but in some situations it can ruin your hubs/spindles and taking the extra time to clean off the grease and redo…

view full answer...

Answer 10

We recommend the Red Grease like the LMX part #L11390 as it's the heaviest duty grease available and it's also waterproof.

view full answer...

Answer 11

Polyurea is in the wheel bearing grease and is compatible with marine bearing grease but not the Red grease. Red grease is compatible with marine grease but not standard. I attached a help article that has a chart with all of the grease…

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

ABMA Precision Rating of the Replacement Trailer Hub Bearing - L68149

Product Page this Question was Asked From

Continue Researching