Will the EcoHitch Hidden Front Mount Trailer Hitch Receiver Fit 2020 Ram 2500 Power Wagon

Question

Question:

Does this fit a Power Wagon with the 12,000lb Warn winch?

asked by: Roger Y

0

Expert Reply:

I spoke with my contact at EcoHitch and the EcoHitch Hidden Front Mount Trailer Hitch Receiver # EH37FR will not fit the 2020 Ram 2500 Power Wagon. I also spoke with Draw-Tite and found out that the Draw-Tite Front Mount Trailer Hitch Receiver # DT36MR will not fit. In both cases it is due to the factory winch.

For a front mount hitch I recommend the Curt Front Mount Trailer Hitch Receiver # C31089. After speaking with Curt, I can confirm that this hitch will fit your Ram 2500 Power Wagon. The vertical load capacity is 500 lbs with a line pull of 9,000 lbs.

expert reply by: Robin H

0

Answer 1

We actually have two options available for front mount hitches on your 2020 Ram 2500 Diesel. First is the Curt #C31089. This is assembled in America, has 9,000 pounds of line pull capacity and 500 pounds of vertical load capacity. Next is the…

view full answer...

Answer 2

You will need the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH37FR for your 2020 Ram 2500 Diesel with the parking sensors. The EcoHitch #306-X7900 only fit up to the 2010-2018 model years. This hitch will included a license plate bracket if…

view full answer...

Answer 3

Yes, it does fit the diesel 2023 Ram 2500 trucks. Our website can be confusing sometimes when it comes to diesel engines but I assure you that the EcoHitch Hidden Front Mount Trailer Hitch item #EH37FR fits both the diesel and gas models. This front…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

We sure do! The only front hitch that is compatible with the 2023 Ram 3500 with a diesel engine is the EcoHitch item #EH37FR. This hitch is custom fit and bolts to your Ram with included hardware. I have linked an installation video below to help you…

view full answer...

Answer 7

Hey Jeff, appreciate all the details you provided that was super helpful and we do have the MORryde cushioned pin box that is designed to replace a Lippert Rhino pin box. For the 17,695 lb GVWR you mentioned on the 2024 Brinkley Model Z 3610, what…

view full answer...

Answer 8

The Access Toolbox Edition Soft, Roll-Up Tonneau Cover #A93VR is designed to fit the youru 2022 Ram 3500 with a 8' dually bed. The Cover #A37FR will only fit an 8' bed with single rear wheels. This is the only difference in these covers is…

view full answer...

Answer 9

If you have the Gooseneck versions of the Curt CrossWing ( #C92DR or #C32DR) you unfortunately would not be able to use the Rota-Flex with it. The pivoting head causing too much strain for the single point of contact you have with a gooseneck hitch.…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

For your 2021 Ram 2500 I recommend the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH37FR you were looking at as it has the highest ratings available of a front mount hitch for your truck at 10000lbs line pull and 1000 vertical load rating.…

view full answer...

Answer 12

As long as the RBW Lil' Rocker mounts to industry standard base rails you'll need the Curt Adapter Rails #C29BR that fit in the OEM puck system on your 2019 Ram 2500 and give you a standard base rail connection. I'm attaching a photo…

view full answer...