Size of Install Bolts Included With Draw-Tite 75682 Class III Hitch for 2016 Cadillac SRX
Question:
What size bolts are included in the package? I just sent back a curt because of the wrong size.
asked by: ERIC T
Expert Reply:
The Draw-Tite # 75682 Class III hitch installs using six M12x1.75x40 hex bolts.
It's extremely unlikely that the previous hitch shipped out with the wrong bolts. The hitch installs using bolts that attach to nuts that have been welded up into the vehicle frame members and bumper beam. After a vehicle is 2 or 3 years old, road grime and corrosion get built up on the threads in those nuts (especially in the rust belt where corrosive chemicals are used to treat the roads in winter). What happens is that the road gunk and corrosion build up on the nuts which prevents the hitch installation hardware from threading into place. This is an extremely common problem.
Before threading the bolts into place, give each of the bolt holes a generous shot of a spray lubricant like PB Blaster and let it sit for a bit. After awhile, give each hole another shot of spray and use a wire brush like what's used on a battery terminal cleaner such as # DW00254 and give the threads a good scrubbing. You might need to do this more than once to get the threads cleaned out to the point where you can get the bolts threaded into place.
I've linked to an installation video for the Draw-Tite 75682 Class III hitch.
Products Referenced in This Question
Battery Post and Terminal Cleaner - Wire Brush
- Wiring
- Tools for Wiring
- Wire Brush
- Deka
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Best 2013 Cadillac SRX Hitch Options
- Shop: etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Does the Swagman # S64665 Bike Rack Fold Away From the Vehicle For Access
- Q&A: How To Install the Spindle Nut on a 12,000 Pound Dexter Axle
- Q&A: Warranty of Tekonsha Activator IV Trailer Brake Controller
- Q&A: Is Tire Size 20.5 x 8-10 the Same as a 205/65-10 Trailer Tire
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Motorhome Side Of Air Force One Braking System For 2021 Fleetwood Discovery On Freightliner Chassis
- Q&A: Choosing Between the Brake Buddy Select 3 and the Blue Ox Patriot Supplemental Braking System
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: How to Choose a High-Low Adapter
- Article: Which Hitches are Made in the USA
- Article: My Trailer Hitch Doesn't Fit