Dimensions Of The Flat Spot On The Powerbuilt Unijack ALL620470 That Would Contact Frame Of Vehicle

Question

Question:

What are the dimensions length and width of the FLAT part of the saddle on the 4000 lb version of the Unijack. Thank you.

asked by: Carl W

0

Expert Reply:

I had our warehouse measure the Powerbuilt Unijack # ALL620470 you were looking at, and the flat part of the saddle that would contact the frame of your vehicle measures 1-1/4" wide x 1-1/2" long as shown in the included diagram.

I included a video review of the # ALL620470 for you to take a look at.

expert reply by: Samuel C

0

Dimensions of Powerbuilt Unijack # ALL620470
(click to enlarge)

Answer 1

The harness you have pictured is the Toyota factory brake controller harness. Toyota usually issues these with each truck. This will work with the Prodigy P3 Brake Controller, #90195, that you purchased. The P3 should have come with a universal…

view full answer...

Answer 2

When the Powerbuilt Unijack #ALL620470 is in it's lowest position it's overall height is 8-5/8 inches. When fully extended the height is 18-3/8 inches.

view full answer...

Answer 3

The Powerbuilt Unijack #ALL620470 is rated for a capacity of 4,000 lbs. That means the weight on the jack and stand at any given point can be an absolute maximum of 4,000 lbs. With your 2012 Toyota Rav4 you will me able to easily change a tire or…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 11

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Dimensions Of The Flat Spot On The Powerbuilt Unijack ALL620470 That Would Contact Frame Of Vehicle

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching