Will the Replacement Heavy Duty Firestone Air Bag Fit a 2002 Spartan MM-2242

Question

Question:

I need front airs bags for a 2002 spartan model mm2242. will these fit

asked by: Matt S

0

Expert Reply:

The Replacement Heavy Duty Firestone Air Bag # F9294 is designed to replace OEM air bags. If you currently have air bags with part number W01-358-9294 then these will fit. If you do not, you will need to measure to see if these will fit on your 2002 Spartan MM-2242.

The top of the # F9294 has a mounting plate measuring 9" in diameter with two mounting holes 5-1/2" apart on center. The bottom measures 9-1/2" in diameter and has a single bolt for mounting in the center. If you find that you do not have these same measurements, this will not be a fit for you.

expert reply by: Robin H

0

Firestone Replacement Air Bag Measurements
(click to enlarge)

Answer 1

The Replacement Heavy Duty Firestone Air Bag part #F9294 has a standing height of 15-1/4 inches. Since it's an air bag and not a rubber spring it doesn't have a compressed height since it would collapse nearly totally flat if there…

view full answer...

Answer 2

Yes, the Firestone Coil-to-Air-Spring Conversion Kit part #F2595 is going to help take the sag out of your 2012 Ram 1500 while hitched to your boat trailer. This system will actually replace the leaf springs on the truck with a set of air springs.…

view full answer...

Answer 3

I do have an option for a 2014 Ram 1500 but the SumoSprings Solo Custom Helper Springs part #SSR-307-40 won't do much for a lifted vehicle. Instead, I recommend the Timbren Rear Suspension Enhancement System part #TDR1500DQ which is really…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Will the Replacement Heavy Duty Firestone Air Bag Fit a 2002 Spartan MM-2242

Product Page this Question was Asked From

Continue Researching