Compatible Female Plug for Mighty Cord A10-30INBKVP RV Power Inlet

Question

Question:

What is the item number for the female plug to put on my existing power cord that is compatible with the above power inlet?

asked by: Terry H

1

Helpful Expert Reply:

The 30A female plug that's compatible with the # A10-30INBKVP Mighty Cord 30A RV power inlet would be part # A10-30FDT. The plug is a twist-lock that provides a secure connection that won't accidently become unplugged. The plug features a slide-off cover for easy access to the wiring terminals.

expert reply by: Mike L

1

Answer 1

We do carry an extended version cord you asked about. It is the Power Grip Marine-Style Power Cord Adapter w/ Handle, part #CAM55501. This has the same style connector as the 18 inch version but is 25 ft long. The built-in handle on the back of the…

view full answer...

Answer 2

Yes, the Mighty Cord Replacement Twist Lock Connector for RVs part #A10-30FDT is compatible with the Furrion Replacement Power Inlet part #431861. I'm not sure what weather cover you're referring to but that's the downside of simply…

view full answer...

Answer 3

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 4

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 5

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

view full answer...

Answer 6

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

Thanks for submitting the picture of the lights you are looking for. Based on that it looks like you are in need of a 194 bulb like the part #A194B.

view full answer...

Answer 9

The different size Equal-I-Zer systems have heads to match the bar sizes so the parts are not interchangeable. But not to worry, with some adjustment you can soften it up a little and not have to use a different system. You will need to lower the…

view full answer...

Answer 10

If the light mounting surface on your older Prowler trailer is not flat enough to allow for use of caulk for sealing the rear of the RV Tail Light #30-92-001 then you might want to use a weather strip tape like #WS1412 which is 1/4-inch thick x…

view full answer...

Answer 11

For your AL-KO 7210 braking assembly, you can use the Hydraulic Brake Kit #AKFBBRK-7 as a replacement. These braking assemblies measure 12" x 2", bolts onto a 5 bolt mounting flange, will work with wheel sizes from 14-1/2" to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Compatible Female Plug for Mighty Cord A10-30INBKVP RV Power Inlet

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching