Can the FloTool RhinoRamps # FT11912MI be Used to Change a Tire on a Double-Axel Trailer?

Question

Question:

could the Rhino tire ramps be used on a double axle trailer to drive upon to change a tire ?

asked by: TERRY L

0

Expert Reply:

I have a solution for you. Unfortunately, my contact at FloTool does not recommend using the RhinoRamps Max Vehicle Ramp Set # FT11912MI for changing a tire on a double-axel trailer. However, a great solution would be the Blaylock EZ Jack and Wheel Chock for Tandem-Axle Trailers # EZ-JACK. The EZ Jack and Wheel Chock has a maximum weight capacity of 20,000 pounds.

expert reply by: Bob C

0

Answer 1

The FloTool RhinoRamps Max Vehicle Ramp Set #FT11912MI is rated for 16,000 lbs while the curb weight (unloaded weight) of your 2021 Ram 3500 is between 6,056 lbs to 7,536 lbs so you will have no issues with the weight of your truck on these ramps for…

view full answer...

Answer 2

You definitely can install either just the front or rear set of SumoSprings before the other. They do work best with them installed all around but people all the time will install on either the front or rear axle first and then later add the other…

view full answer...

Answer 3

To lift the tires of your boat trailer off the ground for storage using a set of the 2-Ton Jack Stands #PTW41021 on each side of both your axles will work well for weight distribution, as long as you're also still using the jack on the tongue to…

view full answer...

Answer 4

A 2-Ton jack stand like #PTW41021 would be perfect. The #PTW41021 stands provide between 10-3/4 and 16-3/4 inches of lift that would be ideal for installing the #RAS3611-YHD RoadActive Suspension kit

view full answer...

Answer 5

The Curt 70105 base plate, which we refer to as part #C68FR would be compatible with a #RM-520 Falcon 2 tow bar by using a #RM-031 Blue Ox base plate to Roadmaster Tow Bar adapter. Curt base plates are manufactured by Blue Ox, so the adapter would…

view full answer...

Answer 6

The Vehicle Jack Stands part #PTW41021 have a combined 4,000 lb weight capacity. These are great for cars or light duty trucks and vans but they won't be safe for anything much larger.

view full answer...

Answer 7

Yes, the Curt Custom Base Plate Kit part #C68FR which is a fit for a 2020 Jeep Wrangler will work with Blue Ox Tow Bars like the Blue Ox Alpha 2 Tow Bar part #BX7380 which is what I recommend using.

view full answer...

Answer 8

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

Answer 9

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

The brake assemblies you have are 7k Dexter assemblies that are 12 inch by 2 inch in size. The part number #AKEBRK-7-SA will work as a great replacement set. This includes assemblies for both sides of your trailer that are self adjusting.

view full answer...

Answer 12

Based on the photo and information you provided, I can tell you have 12 x 2 inch Dexter brake assemblies for 5.2K axles, for which the Electric Trailer Brake Kit #AKEBRK-7-SA will be an excellent replacement. These are self-adjusting brakes so they…

view full answer...

Can the FloTool RhinoRamps # FT11912MI be Used to Change a Tire on a Double-Axel Trailer?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching