Recommended Trailer Brake Controller For 2008 Fleetwood Fiesta LX Motorhome
Question:
I have a 2008 Fleetwood Fiesta lx. I need to get a brake control put in for my trailer. Is this unit pre wired for trailer brakes and where would I find the connection? And what would you recommend for plug and play control? Thanks
asked by: John P
Expert Reply:
That will come down to which chassis your 2008 Fleetwood Fiesta LX is built on.
If it is built on the Ford F-53 Chassis then it will have a trailer brake controller port located behind the instrument cluster that is a bit hard to reach, and if it is built on the Workhorse chassis there is not a factory trailer brake controller port so you would need to hardwire the controller.
For either chassis I recommend the Tekonsha Prodigy P3 # 90195 as it is an extremely reliable controller with great features like an easy to read LCD screen and built in diagnostics that are easy to read and understand.
To install the # 90195 in the F-53 chassis you will need the plug in wiring adapter # 3035-P which plugs into the factory trailer brake controller port.
To install the # 90195 in the Workhorse chassis you will need the # ETBC7. If you do not have a 4-way connector installed on the motorhome you will also need # C58044 as well. This will be everything needed to install a functional 7-way connector and hardwire the controller in.
I included videos of the products mentioned for you to take a look at.
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- 5 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Wiring a Pollak 7-Way Connector on a Fleetwood RV
- Shop: RV Power Cord
- Shop: SumoSprings Solo Custom Helper Springs - Rear Axle
- Shop: Brake Controller
- Shop: Suspension Enhancement
- Q&A: Can 2006 Volkswagen Jetta TDI Manual Transmission be Flat Towed
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Q&A: How To Add a Fuel Tank To a Truck with 5th Wheel Hitch In Bed
- Q&A: Recommended 16' Mesh Tarp for Dump Trailer
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Article: Best Camper Jacks
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Wiring Diagram for Bargman 7-Way RV Style Connector # WG54006-043
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)