What is Typical Trailer Wheel Offset and Will Bearing Buddy Fit Behind Center Cap
Question:
Looking to order a set of wheels for my boat trailer. Not sure how to determine if there is an off set. I have a 2019 shore lander trailer with steel wheels. Also how would one know if the wheel and the center cap will work with bearing buddies?
asked by: Tim M
Expert Reply:
The great thing about trailer wheel offsets is that they are basically always all zero offsets so you wouldn't have to worry about that figure when picking out a wheel like the part # AM30000. Most of the time Bearing Buddies fit behind the correct center cap for a wheel since if the wheel and cap are smaller the Bearing Buddy fit would be proportionately smaller as well.
Product Page this Question was Asked From
Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range B
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range B
- 4.80/4.00-8
- 8 Inch
- K - 65 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Article: RV Pre-Departure Checklist
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Smallest Tire Available with Capacity Greater Than 1600 lbs for Pontoon Boat Trailer
- Q&A: Speed Rating of Load Star 5.30-12 Load Range C Tires
- Q&A: Can 8 Inch Trailer Tires be Replaced with 12 Inch Trailer Tires
- Q&A: Proper Centering of New Trailer Wheel Whose Pilot Hole is Larger Than Original Wheels
- Q&A: Will Yakima HandRoll Kayak Roof Rack Fit Malone Crossbar Conversion Kit
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed