Kayak Carrier That Can Fit 1-1/2 inch Square Crossbars

Question

Question:

I just had a kayak trailer built for my Perception Carolina 14. Getting too old to lowed on top of the Exterra. The crossbars were made with inch and a half square tubing. I prefer saddles loading from the back of the trailer, but will take what I can get at this stage. Does Etrailer have anything in stock ? Thank you

asked by: Jay W

0

Expert Reply:

We have the Sportrack Kayak Carrier # SR5511 available that can fit crossbars that are 1-1/2 inch square like what you have so this would be a great solution. It's a J-style carrier which is easier to load from the side. We don't have any saddle styles that will work.

expert reply by: Jameson C

0

Answer 1

The J-style kayak carrier I recommend that will work on square bars for your trailer is the etrailer J-Style Kayak Carrier #e98878. This will mount around your square bars that are up to up to 3-1/8 inches wide and 1-1/2 inches tall. This is a…

view full answer...

Answer 2

There's no reason the Blaylock EZ wheel lock part #BLEZ-302 wouldn't work on a vehicle wheel. It fits most wheel diameters that are between 15 and 20 inch in diameter which covers most vehicle wheels as well.

view full answer...

Answer 3

The 8004039 you mentioned is the Yakima HullRaiser kayak carrier, and we do have what you need to connect the carrier to your square crossbars (1-1/4 inch by 3/4 inch crossbars are technically rectangular but are called square for whatever reason).…

view full answer...

Answer 4

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587…

view full answer...

Answer 5

In order to mount two kayaks on a 2020 Subaru Outback you will need to haul them both on their side as this is the only way to be able to fit both on the factory roof rack. The best way to haul two kayaks on their side is with a j-style carrier as…

view full answer...

Answer 6

You'll need an adapter, but yes, the etrailer J-Style Kayak Carrier #e98878 is compatible with the Telos XL Load Assist #MPG351XL. What you will need to add is the Universal Roof Rack Adapter Kit for Malone Telos XL Load Assist #MAL95VR. The…

view full answer...

Answer 7

Sorry to hear that, noise typically isn't a major issue with the JetStream bars #Y00425. A fairing will definitely help reduce any whistling as well as drag. Sticking with Yakima, we have the following available: -Yakima WindShield Fairing for…

view full answer...

Answer 8

Yes, we have the Thule Wingbar Evo roof rack part numbers #TH711520 and #TH33ZR that fits your 2023 Jeep Wrangler Unlimited that has the one touch roof. The Wingbars are the quietest and most aerodynamic bars out there so we recommend them highly.

view full answer...

Answer 9

We have a couple of different options that will work with your Sky One-Touch power top but I'd say the best option is going to be with Thule's aerobar setup. You'll need the following components: Thule WingBar Evo Crossbars #TH711520…

view full answer...

Answer 10

The Malone MegaWing, part #MPG207 and the SeaWing, part #MPG107MD are extremely similar and come in Malone's distinctive red styling, but have different applications. Its not the wrong picture, just not a great one to notice the differences. I…

view full answer...

Answer 11

All you need to do is take a utility knife and cut the plastic covering the stake pocket out. Then you can use the Thule TracRac SR #TH43002XT-781.

view full answer...

Kayak Carrier That Can Fit 1-1/2 inch Square Crossbars

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching