Offset Gooseneck Ball Hitch Options For a 2020 Chevrolet Silverado 2500HD

Question

Question:

I have the Curt 60642 on my 2020 Silverado 2500HD. Is there a 4inch to 5inch offset ball that will work on that 60642 system?

asked by: Dennis B

0

Expert Reply:

The Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch # C60642 on your 2020 Chevrolet Silverado 2500HD will not allow for a offset ball. This is due to it not having a locking pin that travels through the shank of the ball like the Curt EZr Double Lock # C65HR or B&W Turnoverball # BWGNRK1020.

Of these systems I recommend the B&W Turnoverball # BWGNRK1020 as the best option. You are able to store the ball in the same hole by simply turning it over to get a flat bed. And you can drop in a B&W Companion 5th Wheel Trailer Hitch # BWRVK3400-5W if you ever switch to hauling 5th wheel trailers.

The Curt 4" Offset Ball # C602 will only work with the Curt EZr double lock gooseneck hitch.

The B&W 4" Offset Ball # BWGNXA4085 will only work with the B&W Turnover ball gooseneck hitch.

expert reply by: Bud M

0

Answer 1

Yes, the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter part #RP94716-61301 will work with any brand of gooseneck hitch as long as they have a 2-5/16" hitch ball like the B&W Turnoverball Underbed Gooseneck Trailer Hitch…

view full answer...

Answer 2

We currently carry two different brands of airbags/compressor systems; Firestone and AirLift. I personally like Firstone as they have been around longer and tend to have better quality products. For your 2017 Ford F-350, I recommend using the…

view full answer...

Answer 3

If you already have a B&W Turnoverball Underbed Gooseneck Trailer Hitch then all you need to install standard base rails is an adapter, the Demco 5th Wheel Base Rails Adapter part #DM6140 or the Curt X5 5th Wheel Base Rails Adapter part #16310.…

view full answer...

Answer 4

When installing the B and W Turnoverball gooseneck hitch part #BWGNRK1020 that fits your 2020 Chevy Silverado 2500HD the 4 inch diameter hole in the bed that needs to be drilled will be 37-1/8 inches from the rear of the truck bed.

view full answer...

Answer 5

The hole for the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1020 on your 2022 Chevrolet Silverado 2500HD will be either 45-5/16" for a long bed(8') or 37-1/8" for a short bed(6-1/2') to the center of the hole from…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Offset Gooseneck Ball Hitch Options For a 2020 Chevrolet Silverado 2500HD

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching