Should Rhino-Rack Pioneer Platform be Removed Before Installing Roller Accessory RR43131

Question

Question:

Can I install this roller bar with the platform already mounted to the vehicle, or will I need to remove the platform first?

asked by: Justin W

0

Expert Reply:

Good question, and yes, you will want to remove your Rhino-Rack Pioneer platform rack should definitely be removed from your vehicle before installing the Roller Accessory for Rhino-Rack Pioneer Platform Racks - 50" Long # RR43131.

The reason for that is when installing the Roller Accessory # RR43131, screws need to be removed from under the Pioneer, and you'll also have to enlarge holes in the Pioneer with a drill bit, so you'll want to keep that away from your vehicle while you do it.

I have added a link below to the installation instructions for you to check out as well of the Roller Accessory for Rhino-Rack Pioneer Platform Racks - 50" Long # RR43131.

expert reply by: Kyle S

0

Answer 1

The distance between mounting hole centers on the Roller Accessory for Rhino-Rack Pioneer Platform Racks #RR43131 is 45-1/4 inches. This 50" roller is compatible with Rhino Rack Pioneer Platforms that are 56" wide, such as…

view full answer...

Answer 2

The 7 Gallon Road Shower by Yakima #Y89VR attaches to roof racks that have crossbars with mounting brackets that fit around the bars. So you'd need to install the load bar adapter #RR43137B on your Rhino Rack Pioneer Platform so that the…

view full answer...

Answer 3

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 4

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll…

view full answer...

Answer 5

Typically you need 3 inches of clearance from the top of the tire to the bottom of the trailer fender. So to determine if you'd have enough fender clearance you'd need to know the tire diameter and you can go from there. When the…

view full answer...

Answer 6

A platform roof rack is a great way to carry cargo on your 2020 Chevy Suburban, and the best option for a platform rack that fits your Suburban is the Rhino-Rack Pioneer Platform Rack #RR68AB. The reason this is the best platform rack is because at…

view full answer...

Answer 7

It sounds like you have a 2019 Hyundai Santa Fe with flush side rails. If that is the case then you will have to install both Thule Crossbars and Thule Mounting Feet as Thule Crossbars cannot be used with Yakima Mounting Feet and the Yakima Mounting…

view full answer...

Answer 8

The great thing about the Yakima Longarm part #Y01149 is that you can use it at different angles which puts the bar at varying heights so that you can pick the best height that will help you load. So you wouldn't have to worry about the bar…

view full answer...

Should Rhino-Rack Pioneer Platform be Removed Before Installing Roller Accessory RR43131

Continue Researching