Correct Replacement for Atwood 7" x 1-3/4" Hydraulic Drum Brakes
Question:
Several years ago i watched a video and bought an atwood at84186 its a 7inch brake assembly. I need shoes and a wheel cylinder for it. Was going to go with another complete assembly but my hub will not come apart to do that so i just need parts to fit my backing plate. Do you have these
asked by: Coy W
Expert Reply:
The correct replacement for Atwood 7" x 1-3/4" Hydraulic Drum Brakes is the Dexter Hydraulic Trailer Brake Kit part # 23-398-399. If you are having trouble removing the old brakes, I recommend applying heat but you can cut the nuts off worst case.
Unfortunately, Atwood is no longer in business and there will be no replacement parts like the shoes etc. for this assembly.
Product Page this Question was Asked From
Dexter Hydraulic Trailer Brake Kit - Uni-Servo - 7" - Left and Right Hand Assemblies - 2.5K
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Manual Adjust
- Single Servo
- 7 x 1-3/4 Inch Drum
- 2500 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Hydraulic Trailer Brake Kit - Uni-Servo - 7" - Left and Right Hand Assemblies - 2.5K
- Video: Dexter Axle Trailer Brakes - Hydraulic Drum Brakes - 23-398-399 Review
- Shop: Replacement Right-Hand Uni-Servo Wheel Cylinder Assembly for 7" Brakes - Qty. 1
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Shop: Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 7" - Right Hand - 2,500 lbs
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 12" - Left and Right Hand Assemblies - 5.2K to 7K
- Shop: Grease Seals (pair)
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3,500 lbs
- Q&A: Replacement Grease Seal For 15192TC Grease Seal On Older Utility Trailer
- Q&A: Brake Drum for a Reliable 2,700 Pound Trailer Axle
- Search Results: trailer bearing
- Search Results: dexter brake actuator
- Shop: Trailer Wiring
- Q&A: How is a 4 on 4 Inch Wheel Bolt Pattern Measured
- Q&A: How to Measure Brake Drums
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Search Results: 6 lug brake drum
- Q&A: What Tool is Needed to Remove the Castle Nut on a Trailer Axle
- Q&A: Grease Seal Recommendation for Trailer to Replace 15192TC
- Video: Dexter Axle Trailer Brakes 23-399 Review
- Video: Dexter Electric Trailer Brake Kit Installation
- Video: Review of Dexter Axle Trailer Brakes - RH and LH 7 Inch Electric Drum Brakes - 23-47-48
- Video: Kodiak Trailer Brakes 15SI-BLKIT Review
- Search Results: hydraulic brake actuator
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Video: Buyers Products Trailer Wiring Junction Box Review
- Video: Review of Dexter Axle Replacement Inner Member - DX97FR
- Search Results: atwood master cylinder
- Search Results: atwood
- Article: The Best Boat Bumpers