How Long Are the Cables for the Conventional Ramp Door Spring for 5' Wide Enclosed Trailer

Question

Question:

How long are the cables? The length i need is about 7foot long

asked by: Rigo L

1

Helpful Expert Reply:

The Conventional Ramp Door Spring for 5' Wide Enclosed Trailer part # 362SA5 comes with cables that are 135" long.

expert reply by: Conner L

1

Answer 1

An Enclosed Trailer Ramp Spring, like part #362SA4, can be cut down to fit 23-3/4" to 43-3/8" doors. Ramp Spring #362SA5 can fit 31-5/8" to 55-1/2" inch doors. They are customizable to fit the space available in your trailer as…

view full answer...

Answer 2

Normally the trailer ramp springs like the #362SA5 attach to the inside of the top of a trailer door like the picture I attached shows. In the picture you can also see how it attaches to the ramp as well.

view full answer...

Answer 3

I reached out to the manufacturer, who told me the cable was 135 inches long for the Conventional Ramp Door Spring for 5' Wide Enclosed Trailer #362SA5. What you will do is measure from the top of your door down to the bottom of the door and if…

view full answer...

Answer 4

With the cable of the TRC Ramp Spring #362SA5 being 135 inches long, using the form to get the measurements of a right triangle, a^2+b^2=c^2, you will get 67 1/2 inches. This will therein allow for a door that is just over 5 1/2 feet.

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 7

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 11

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

How Long Are the Cables for the Conventional Ramp Door Spring for 5' Wide Enclosed Trailer

Product Page this Question was Asked From

Continue Researching