Recommended Spare Hub For 1-1/16" Straight Spindle W/ 1.50" Diameter Seal Surface
Question:
What are the dimensions of Seal Code: 125255UC? My seal surface is 1.5”dia and spindle is straight 1-1/16” inner and outer- I’m trying to find a spare hub . Bolt pattern is 5x4.5
asked by: Andy
0
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 9 Inch Wheel
- 10 Inch Wheel
- 11 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-259-5UC1-EZ Review
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Q&A: Difference Between Tire Sizes 4.80-12 and 5.30-12
- Video: SumoSprings Solo Rear Helper Springs Installation - 2023 Toyota Tacoma
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Q&A: Replacement Trailer Hub for Dexter 8-259 Idler Hub
- Q&A: Is It Required The Spring Seat Be Welded to Trailer Axle
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 3-3/8" - Qty 1
- Shop: Suspension Bushing - Nylon
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized
- Shop: Suspension Enhancement
- Q&A: How To Get Additional Clearance To Run Larger Tires On Karavan 5 x 8 Utility Trailer
- Q&A: What is the Capacity of the Axle in Dexter Trailer Axle Kit with Idler Hubs 20545I-EZ-72-15
- Q&A: Recommended 2000lb Replacement Axle With 72" Hub Face Measurement For 5' x 8' Trailer
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Search Results: cotter pins
- Search Results: 125255uc grease seal
- Search Results: grease seal
- Search Results: 125255uc
- Search Results: 125255uc seal
- Shop: Trailer Hitch