Troubleshooting Lippert Power Stance Electric Trailer Jack LC89VR No Longer Working
Question:
My unit just quit working as if there’s no power getting to the unit
asked by: Jesse E
Helpful Expert Reply:
I would be happy to help!
Now the cause for the power not getting to your Lippert Power Stance Electric Trailer Jack # LC89VR will be dependent on if you are using the 7-way adapter to draw power from your vehicles 7-way connector, or if you hard wired the jack to the battery on your trailer.
Starting with the 7-way connector option I recommend using a circuit tester like # 40376 to verify that the 12v power pin of your 7-way connector is working correctly. This is the 1 o'clock pin as shown in the included diagram. If you do not have power you will want to check the engine bay fuse box of your vehicle and see if the the fuse is blown.
If you hardwired the # LC89VR to the on-board battery of your trailer you will want to check the inline fuse on the red power wire to make sure it is not blown. You will also want to make sure your trailer battery is fully charged as a battery that is not fully charged can prematurely blow the fuse.
I included a video of the # LC89VR for you to take a look at.
Product Page this Question was Asked From
Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs
- Camper Jacks
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jack
- Steel
- 3001 - 4000 lbs
- Electric Jack
- Bolt-On
- 1 Jack
- Lippert
more information >
Continue Researching
- Shop: Lippert SolidStep RV Steps for 29" to 36" Wide Doorways - 2 Steps
- Shop: Lippert SolidStep RV Steps for 25" - 28-7/8" Wide Doorways - 2 Steps
- Shop: Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug - A-Frame - 18" Lift - 3,500 lbs
- Shop: Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black
- Search Results: removable jack wheel
- Video: Lippert SolidStep RV and Camper Steps Manufacturer Review
- Shop: Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 4,500 lbs - Black
- Q&A: Dimensions of Lippert Power Stance Electric Trailer Jack LC89VR
- Video: Lippert Power Stance Electric Trailer Jack Review and Installation
- Video: Review of Lippert Components Camper Jacks - Electric A-Frame Jack - LC89VR
- Shop: Suspension Enhancement
- Video: etrailer Trailer Jack JC-101 Review
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Stability Control for Heavy Duty Vehicles
- Q&A: Width of Lippert LC733932 Solid Step RV Steps
- Shop: Ram Removable, 6" Poly Caster Assembly for 2" Jack Tube - 1,200 lbs
- Shop: Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jack - 8" Diameter - 1,600 lbs
- Q&A: Troubleshooting Trailer Wiring With 2008 Ford F-450
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Video: B&W Continuum Weight Distribution System Review
- Video: B&W Continuum Weight Distribution System Vendor Review
- Shop: Side Window Vents
- Shop: Base Plate for Tow Bar
- Shop: Grille Guard
- Shop: Vehicle Sway Bars
- Video: etrailer Electric Jack with Footplate and 7-Way Plug Review
- Q&A: Out of Stroke Error on Ground Control 3.0
- Q&A: Troubleshooting Husky Brute Electric Trailer Jack That is Clicking
- Q&A: Lippert Stabilizer Jack is Clicking
- Shop: RV Camera