Parts Needed To Install Trailer Brake Controller In 2019 Honda Passport
Question:
I need a brake controller and Plug-In Wiring Adapter for Electric Brake Controllers for a 2019 Honda Passport. Are there any wiring adapters that plug directly into the Passport
asked by: Mark S
Expert Reply:
I would be happy to help!
You can absolutely install a trailer brake controller in your 2019 Honda Passport, but there are no wiring adapters available to plug in the controller to your factory trailer brake controller port, so you will need to hard wire it.
I recommend the Tekonsha Prodigy P3 # 90195 you were looking at as it is an extremely reliable controller with great features like an easy to read LCD screen and built in diagnostics that are easy to read and understand.
If your Passport does not already have a 7-way connector you will need to add one using # 118286.
To install the # 90195 in your Passport you will need the factory trailer brake controller wiring adapter which will plug in to the factory controller port underneath the dash of your truck and will give you 4 wires that you will connect the controller to.
The blue wire of the factory harness will get connected to the black wire of the controller
The black wire of the factory harness will get connected to the white wire of the controller
The brown wire of the factory harness will get connected to the blue wire of the controller
The sky blue wire of the factory harness will get connected to the red wire of the controller
I included videos of the products mentioned for you to take a look at.
Products Referenced in This Question
T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 7 Round - Blade
- Tekonsha
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Choose the Right Trailer Hitch Class
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Q&A: Troubleshooting A Clunking Noise Between A Fifth Wheel Hitch And Base Rails While Towing
- Q&A: Why Is 5th Wheel Trailer Clunking When Starting/Stopping with B&W Companion and MORryde Pin Box
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Q&A: How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Recommended Dexter Suspension Kit 7753400