Recommended Flat Towing Equipment For A 2013 Jeep Wrangler Unlimited  

Question:

Expert Reply:

The correct fitting base plate for your 2013 Jeep Wrangler Unlimited that will also be compatible with your Roadmaster Eagle 5000 tow bar is the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # RM-521448-4.

The curb weight on a 2013 Jeep Wrangler Unlimited is 3874lbs - 4921lbs so I recommend you ensure you aren't going to go over the 5,000lbs weight capacity of your Roadmaster Eagle 5000. If you want to stick with a ball mount tow bar you can upgrade to the Roadmaster StowMaster Tow Bar - Car Mount - 2" Ball - 6,000lbs Item # RM-501 for a 2" ball or the Roadmaster StowMaster Tow Bar - Car Mount - 2-5/16" Ball - 6,000lbs Item # RM-504 for a 2-5/16" ball.

If you want to switch to a 2" receiver tow bar I recommend the Roadmaster Falcon All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,000lbs Item # RM-522. It comes with a non-binding feature that makes hooking up and disconnecting on uneven surfaces super easy.

To flat tow your Jeep you'll also need tow bar wiring, safety cables, and a braking system. I have the following recommendations for those below:

Tow bar wiring: Roadmaster Universal Hy-Power Diode Wiring Kit Item # RM-154. This wiring kit is a one time setup that ties into the wiring of your tail lights instead of having to run magnetic lights every time you want to tow your vehicle.

Safety cables: RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000lbs Item # RM-643. The coils on these cables will help prevent dragging on the ground while towing your vehicle.

Braking system: Brake Buddy Stealth Supplemental Braking System - Proportional Item # HM39530. This braking system is a one time setup and comes with a battery charger to prevent your vehicle's battery from draining while being towed.

expert reply by: Kevin C

0