Will BAKBox 2 Collapsible Truck Bed Toolbox Fit a Revolver X4

Question

Question:

BAKBox 2 Collapsible Truck Bed Toolbox for BAK Revolver X2, BAK Roll-X, and BAKFlip Tonneau Covers Part BAK92201 Will this not work with the BAK Revolver X4 tonneau?

asked by: RBaker

0

Expert Reply:

Since the only difference between a Bak Revolver X2 and an X4 is the finish (matte vs. gloss) the BAKBox 2 Collapsible Truck Bed Toolbox # BAK92201 that you referenced would fit an X4 cover as well.

expert reply by: Jameson C

0

Answer 1

For your 2006 Dodge Mega Cab Diesel, I recommend the BAK Revolver X2 Hard Tonneau Cover - Roll Up - Aluminum and Vinyl #BAK39203. This locking tonneau cover is a very strong and good looking cover that will secure your 5th wheel hitch underneath.…

view full answer...

Answer 2

The rails on the TruXedo Sentry Hard Tonneau Cover #TX1548901 for your 2023 Ram 3500 long bed extend into the bed 3" on each bed rail.

view full answer...

Answer 3

For your 2021 Ram 3500 long bed dually the roll up tonneau cover you'd want is the part #A93VR which was designed to fit behind tool boxes like you are wanting as well. But another cool option is the BAKBox part #BAK92201 which fits under a…

view full answer...

Answer 4

You can get a sense for how much visibility you'll have on your 5th wheel hitch with a tonneau cover folded up near the cab by viewing the linked image. The BAKFlip MX4 Hard Tonneau Cover #BAK48204 that fits your 2018 Ram 3500 long bed will…

view full answer...

Answer 5

Yes, the BAKFlip part #BAK48204 that you referenced is a confirmed fit for your 2022 Ram 3500 long bed dually. We have confirmed this with BAK that it fits the dually and non-dually models.

view full answer...

Answer 6

I have a tonneau cover solution for you but, it is not the BAKFlip F1 Hard Tonneau Cover, #BAK72204. Which is confirmed to fit your 2021 Ram 3500 but must be folded against the cab window and secured or, to the last section and secured with straps,…

view full answer...

Answer 7

Since your 2017 Ram 3500 has an 8' bed the BAKFlip MX4 Hard Tonneau Cover #BAK48204 will be a quad-fold. Trucks that have a bed over 6' long will be quad-fold while trucks that have a bed under 6' long will be a tri-fold. I've sent an…

view full answer...

Answer 8

I can give you an approximation, but this is not a specific measurement that has been taken for your 2022 Ram 2500 with the BAKBox 2 Collapsible Truck Bed Toolbox for BAK Revolver X2, BAK Roll-X, and BAKFlip Tonneau Covers #BAK92201. The top of the…

view full answer...

Answer 9

The BAKFlip MX4 #BAK48204 is of a slightly higher quality than the G2 #BAK26204 for your 2023 Ram 3500 long bed. The MX4 has a 5 year warranty versus the 3 year for the G2. The MX4 has matte finish panels that does a better job of hiding…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Will BAKBox 2 Collapsible Truck Bed Toolbox Fit a Revolver X4

Products Referenced in This Question

Featured Help Information

Instructions

Continue Researching