2002 Alumaweld Boat Rogue Trailer Hubs Replacement
Question:
Will AKIHUB 545 35 G EZ K galvanized hubs fit on my Alumaweld boat Rogue Trailer. The ID plate indicates RT 22 - 4000Afoot which I take as a 4000# load rating over the four 14inch wheels. My spindle outer bearing journal is 1.0610 ID, the inner bearing journal is 1.3745 ID, and the Grease seal journal is 1.7275 ID. The Trailer Buddy axles are torsion mounted. My best measurement for the hub bolt spacing dia. is 4-1/4 Thanks for your help
asked by: Barry W
Expert Reply:
Yes the trailer hub part # AKIHUB-545-35-G-EZ-K that you referenced does fit the spindle of your Alumaweld boat Rogue trailer based on the bolt pattern and spindle dimensions you mentioned.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Pull Pin, Easy Swivel Trailer Jack with Foot - Sidewind - 10" Travel - 2,000 lbs
- Search Results: haulmark
- Shop: Base Plate for Tow Bar
- Shop: Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 7/8" D-Rings
- Shop: Pro Series Round, Snap-Ring Swivel Jack - Weld On - Sidewind - 10" Lift - 2,000 lbs
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Adding a Battery on an Enclosed Trailer to Power Interior Lights
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Article: Most Popular Wheel Bearings
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-EZ-K Review
- Video: etrailer Trailer Bearings Races Seals Caps - Seals - 58846 Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35-SA Review
- Q&A: What Bearing Kit do I Need for my 2007 EZ Loader Boat Trailer
- Q&A: Can an EZ Lube Hub and Drum be Used with Bearing Buddies on a Non-EZ Lube Trailer Axle
- Q&A: Bearing Buddy Compatibility With 1.99 Inner Diameter Hub Assemblies.
- Q&A: Which Bearing Buddy to Use with Trailer Hub # AKIHUB-545-35-G-EZ-K
- Q&A: Parts Needed When Adding Brakes to a 3,500 Lbs. Axle
- Q&A: Recommended Bearings and Hubs for 3500 lb Square Axle Trailer Spindle
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: Review of Dexter Trailer Hubs and Drums - Pre-Greased 3500 LB - 84546UC3-EZ
- Search Results: akihub~545~35~g~ez~k
- Search Results: dexter wheel bearings
- Search Results: dexter hub assembly
- Search Results: wheel hub assembly
- Shop: Vehicle Cargo Control
- Shop: Tire Chains