Ground Clearance Of The Curt Trailer Hitch Receiver On A 2018 Mazda 3 Sedan
Question:
With part #C11377, how much ground clearance is lost on a 2018 Mazda 3 Sedan when measured from the lowest hanging point of the rear bumper. Or if its easier to answer, what is the ground clearance with the hitch installed when measured from the bottom on the receiver. Thanks you!
asked by: CJ
Expert Reply:
The 2014-2018 Mazda 3 are the same generation car. The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4", part # C11377, is 11 1/2" from the ground to the top of the inside of the hitch receiver on both the 2015 and the 2017 Mazda 3. The 2018 should not be any different. So if we subtract an 1 1/4", which is the size of the hitch receiver, from the 11 1/2" measurement, you are left with between 10" and 10 1/4" inches of clearance from the ground to the bottom of the hitch receiver.
I have included the installation video links for the 2015 and 2017 Mazda 3 below.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Search Results: 2" ball
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Video: Curt Class II Drawbar Review C45014
- Video: Curt Ball Mounts - Fixed Ball Mount - C45014 Review
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Trailer Wiring
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: 44649
- Video: Choosing the Right Brake Controller
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Search Results: dust cap
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Article: How to Measure for Trailer Hitch Drop
- Search Results: 25580
- Shop: Fifth Wheel Hitch
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Search Results: dust caps
on Trailer Hitch
